Application are invited for admission to the following courses - 2009
1. Certificate Course in Fire Technology and Industrial Safety Management
2. Six-Month Certificate Course in Fire Fighting
3. Diploma course in advanced fire & industrial safety management
4. Diploma Course in Rescue & Fire Fighting
5. Certificate Course for "Chief Security Officer
6. Part time course in Industrial Security & Fire Fighting
7. Diploma Course in Fire Technology and Industrial Safety Management
8. Diploma Course in Industrial Safety
Eligibility: For Course No. 1,3, 5 candidates should have passed 10+2 examination.
For Course No.2, 4, 6 candidates should have passed 10th examination.
Application procedure: The prospectus & application form can be obtained by sending a DD of Rs.300/- in favour of “Delhi Institute of Fire Engineering” form the institute.
The application form can also be obtained personally from the institute by payment of Rs.250/- in cash.
Tel. : 011-32474700, 011-25366517
Website: http://www.dife.in/
Address: 579, Raj Nagar (Near Dada Dev Mandir), Sector - 7, Dwarka, New Delhi- 110045
Last date of submission of Forms: 20.01.2009
Thursday, January 15, 2009
Tuesday, January 13, 2009
Chaha Nehru Bal Chikitsalaya Delhi - Admission to DNB Course - 2009
DNB COURSE
Applications for DNB Course in Pediatric Surgery (3 years) are invited as per following details for Chaha Nehru Bal Chikitsalaya Delhi.
Eligibility
MS/DNB (General Surgery)
The application on plain paper in the prescribed format as available on the hospital website, typed or neatly hand written along with the Demand Draft of Rs. 500/- payable to Dean, Maulana Azad Medical College, New Delhi (Non refundable) should be sent to the Office of the Medical Superintendent, Chacha Nehru Bal Chlkitsalaya by 28th January 2009.
Applications received late will not be considered. Attested copies of all the certificates should be enclosed with the application. No original certificates are to be enclosed and these will be verified at the time of Counseling. Only applications received against this advertisement will be considered.
The Admission criteria & annual fee will be applicable as per the guidelines of the National Board of Examination. The candidates should have qualified CET DNB (super specialities).
A list of short listed candidates for aptitude test will be displayed on the notice board of the hospital and on the website of the hospital on 30th January 2009.
An Aptitude Assessment test will be held on the 6th February 2009 at Chacha Nehru Bal Chlkitsalaya. The list of the selected candidates will be displayed on the Notice board and the website of the hospital at the address www.cnbc.delhigovt.nic.in . Selected candidates will have to register themselves with the DMC.
Sd/-
Director CNBC
Chaha Nehru Bal Chikitsalaya Delhi
Geeta Colony, Delhi - 31
Applications for DNB Course in Pediatric Surgery (3 years) are invited as per following details for Chaha Nehru Bal Chikitsalaya Delhi.
Eligibility
MS/DNB (General Surgery)
The application on plain paper in the prescribed format as available on the hospital website, typed or neatly hand written along with the Demand Draft of Rs. 500/- payable to Dean, Maulana Azad Medical College, New Delhi (Non refundable) should be sent to the Office of the Medical Superintendent, Chacha Nehru Bal Chlkitsalaya by 28th January 2009.
Applications received late will not be considered. Attested copies of all the certificates should be enclosed with the application. No original certificates are to be enclosed and these will be verified at the time of Counseling. Only applications received against this advertisement will be considered.
The Admission criteria & annual fee will be applicable as per the guidelines of the National Board of Examination. The candidates should have qualified CET DNB (super specialities).
A list of short listed candidates for aptitude test will be displayed on the notice board of the hospital and on the website of the hospital on 30th January 2009.
An Aptitude Assessment test will be held on the 6th February 2009 at Chacha Nehru Bal Chlkitsalaya. The list of the selected candidates will be displayed on the Notice board and the website of the hospital at the address www.cnbc.delhigovt.nic.in . Selected candidates will have to register themselves with the DMC.
Sd/-
Director CNBC
Chaha Nehru Bal Chikitsalaya Delhi
Geeta Colony, Delhi - 31
MSME Tool Room Bhubaneswar - Admission 2009
Advanced Diploma in CNC Programming Technique & Practices - Six Months (6 hrs/day)
Course Contents : CNC Fundamentals, Auto CAD, CNC Milling & Turning, Master CAM, Uni-graphics. Practice &. Project on actual CNC Machines with and without DNC Project.
FEE : Rs.19.500/ (Paid in 3 installments )
ELIGIBILITY •Diploma in Mechanical / Production Engineering / Automobile / Manufacturing / Mould Making / Tool & Die Making or equivalent.
Certificate Course in Master of CAD / CAM – 6 Months
Auto CAD, Basic machining process, CNC part programming & Operation, CATIA, Unigraphics, PRO-E, ANSYS, Oral Communication & Personality Development, Project work & Manufacturing
Fee: Rs.25,500/- (to be paid in three equal installments)
Eligibility: Degree in Mechanical / Production / Automobile or equivalent
How to apply
Applications are to be submitted in plain paper along with Bio-data, copies of mark-sheets & certificates, two passport size photographs. A DD of Rs.1000/- drawn in favour of "Central Tool Room & Training Centre” payable at Bhubaneswar is to be paid for the purpose of registration which will be adjusted against the course fee.
For SC/ST candidates no course fee is to be paid subject fulfillment of exemption criteria.
MSME Tool Room Bhubaneswar
Sr. Manager (Training), Central Tool Room & Training Centre,
B-36, Chandaka Industrial Area, Bhubaneswar – 751 024, Orissa
Tel: 0674 – 2743349, 3011702
Fax: 0674- 2743061
Website: www.cttcbbsr.co.in
Email: cttc@satyam.net.in
Course Contents : CNC Fundamentals, Auto CAD, CNC Milling & Turning, Master CAM, Uni-graphics. Practice &. Project on actual CNC Machines with and without DNC Project.
FEE : Rs.19.500/ (Paid in 3 installments )
ELIGIBILITY •Diploma in Mechanical / Production Engineering / Automobile / Manufacturing / Mould Making / Tool & Die Making or equivalent.
Certificate Course in Master of CAD / CAM – 6 Months
Auto CAD, Basic machining process, CNC part programming & Operation, CATIA, Unigraphics, PRO-E, ANSYS, Oral Communication & Personality Development, Project work & Manufacturing
Fee: Rs.25,500/- (to be paid in three equal installments)
Eligibility: Degree in Mechanical / Production / Automobile or equivalent
How to apply
Applications are to be submitted in plain paper along with Bio-data, copies of mark-sheets & certificates, two passport size photographs. A DD of Rs.1000/- drawn in favour of "Central Tool Room & Training Centre” payable at Bhubaneswar is to be paid for the purpose of registration which will be adjusted against the course fee.
For SC/ST candidates no course fee is to be paid subject fulfillment of exemption criteria.
MSME Tool Room Bhubaneswar
Sr. Manager (Training), Central Tool Room & Training Centre,
B-36, Chandaka Industrial Area, Bhubaneswar – 751 024, Orissa
Tel: 0674 – 2743349, 3011702
Fax: 0674- 2743061
Website: www.cttcbbsr.co.in
Email: cttc@satyam.net.in
IGNOU ( Indira Gandhi National Open University)
Post Graduate Diploma in Pharmaceutical Sales Management (PGDPSM) Programme – One Year Programme
Eligibility: Science Graduates (B.Sc., B.Pharm., B.V.Sc, BPT, BOT, MBBS, BUMS, BAMS, BlMS/ BHMS etc) and Non- Science Graduates with D. Pharm. Programme
Application procedure: The Application Form and further details can be downloaded from IGNOU's website www.ignou.ac.in [(In case of downloaded Form, the cost of the Form (Rs. 200/-) must be added to the programme fee)] or obtained in person by paying Rs. 200/- in cash from IGNOU Head Quarter/Regional Centres or by sending a DD of Rs. 250/- in favour of IGNOU, New Delhi at the following address:
Prof. Javed Abrar Farooqi (Programme Coordinator); Room No. 122, Raman Bhawan (D- Block); IGNOU, Maidan Garhi, New Delhi 110068;
Filled in Application Forms can be submitted at the above address.
Tel: 011 - 29535924-32, 29535062-65
Fax: 011 - 29536588
Website: http://www.ignou.ac.in/
Address: Maidan Garhi , Post Bag No.3, Pin-110068
Last date of submission of Forms: 15th February, 2009
Fee : Rs.7500/—only.
Eligibility: Science Graduates (B.Sc., B.Pharm., B.V.Sc, BPT, BOT, MBBS, BUMS, BAMS, BlMS/ BHMS etc) and Non- Science Graduates with D. Pharm. Programme
Application procedure: The Application Form and further details can be downloaded from IGNOU's website www.ignou.ac.in [(In case of downloaded Form, the cost of the Form (Rs. 200/-) must be added to the programme fee)] or obtained in person by paying Rs. 200/- in cash from IGNOU Head Quarter/Regional Centres or by sending a DD of Rs. 250/- in favour of IGNOU, New Delhi at the following address:
Prof. Javed Abrar Farooqi (Programme Coordinator); Room No. 122, Raman Bhawan (D- Block); IGNOU, Maidan Garhi, New Delhi 110068;
Filled in Application Forms can be submitted at the above address.
Tel: 011 - 29535924-32, 29535062-65
Fax: 011 - 29536588
Website: http://www.ignou.ac.in/
Address: Maidan Garhi , Post Bag No.3, Pin-110068
Last date of submission of Forms: 15th February, 2009
Fee : Rs.7500/—only.
Sinhgad Business Schools
Courses offered: PGDM (MBA equivalent) ADMISSIONS 2009:
MMM - Master of Marketing Management (Two years Full time)
MPM - Master of Personnel Management (Two years Full time)
MCM - Master of Computer Management (Two year Full time)
PGDFT - PG Diploma in Foreign Trade (One year Full time)
PGDIEM - PG Diploma in Import Export Management (One year Programme)
PGDMLM - PG Diploma in Materials & Logistics Management (One year Programme)
PGDBM - PG Diploma in Business Management (Two years PT Programme)
PGDFS - PG Diploma in Financial Services. (One year Programme)
PGDMM - PG Diploma in Marketing Management. (One year Programme)
Eligibility: Graduates with minimum 45% marks from any statutory university or its equivalent AND Must have valid score in any of the entrance tests conducted for admission to PG programmes in management viz. CAT/MAT/XAT/ ATMA/ CET etc. or any entrance test conducted at National level for admission to P.G courses in Management (including deemed Universities).
The candidates appearing for the final year graduate Examination are also eligible.
Application procedure: Download the application form and prospectus from www.sinhgad.edu and duly filled application forms be forwarded to Dy. Registrar (Admissions) Sinhgad Business School, 19/15 Smt. Khilare
Marg, off Karve Road, Pune-411004 (admissions authority) along with a DD draft of Rs.1500/- favouring “Sinhgad Business School” payable at Pune.
Email : sbsadmission@sinhgad.edu
Tel. 020-25431001, 24354721
Website: www.sinhgad.edu
Address: 19/15 Smt. Khilare, Marg, off Karve Road, Pune-411004
Last date of submission of Forms: 31st January 2009
Selection Process : Candidates are required to appear for Group Discussion & Personal Interview followed by counseling at Sinhgad Business School, Pune City. For GD, PI & Counseling Contact Dy. Registrar (Admissions) personally.
MMM - Master of Marketing Management (Two years Full time)
MPM - Master of Personnel Management (Two years Full time)
MCM - Master of Computer Management (Two year Full time)
PGDFT - PG Diploma in Foreign Trade (One year Full time)
PGDIEM - PG Diploma in Import Export Management (One year Programme)
PGDMLM - PG Diploma in Materials & Logistics Management (One year Programme)
PGDBM - PG Diploma in Business Management (Two years PT Programme)
PGDFS - PG Diploma in Financial Services. (One year Programme)
PGDMM - PG Diploma in Marketing Management. (One year Programme)
Eligibility: Graduates with minimum 45% marks from any statutory university or its equivalent AND Must have valid score in any of the entrance tests conducted for admission to PG programmes in management viz. CAT/MAT/XAT/ ATMA/ CET etc. or any entrance test conducted at National level for admission to P.G courses in Management (including deemed Universities).
The candidates appearing for the final year graduate Examination are also eligible.
Application procedure: Download the application form and prospectus from www.sinhgad.edu and duly filled application forms be forwarded to Dy. Registrar (Admissions) Sinhgad Business School, 19/15 Smt. Khilare
Marg, off Karve Road, Pune-411004 (admissions authority) along with a DD draft of Rs.1500/- favouring “Sinhgad Business School” payable at Pune.
Email : sbsadmission@sinhgad.edu
Tel. 020-25431001, 24354721
Website: www.sinhgad.edu
Address: 19/15 Smt. Khilare, Marg, off Karve Road, Pune-411004
Last date of submission of Forms: 31st January 2009
Selection Process : Candidates are required to appear for Group Discussion & Personal Interview followed by counseling at Sinhgad Business School, Pune City. For GD, PI & Counseling Contact Dy. Registrar (Admissions) personally.
University Of Pune
Certificate Course in VLSI Design – 6 Months Full Time
Advanced Digital Design, CMOS VLSI Design Hierarchy, System Architectures, Embedded Systems, High Level Design Methodology, Testing & Verifications, DSP, Industry Standard Projects
Certificate Course in Embedded System Design - 6 Months Full Time:
The course focus is on Advanced C, OOPs, RTOS, RTLINUX, Embedded System Hardware, Microprocessor, Microcontroller, CPLD, CSoC, DSP Fundamentals, Telecom Fundamentals, Sensors and Control Systems so on and Case Study, Industry Standard Projects.
Eligibility: B.E./BTech (Electronics & Telecommunication, Electrical, Instrumentation or Computers), M.Sc. (Electronics, Instrumentation, Computers or Physics with Spl. Electronics), M.C.S or equivalent.
Application procedure: Application from available at our centre and on the web site. Application and Entrance Exam Fee Rs. 250/- to be paid by cash / DD in favor of ICIT Pvt. Ltd. Pune, payable at Pune.
Applicants name & full address must be mentioned on the reverse side of the Demand Draft.
Email : vlsi@unipune.ernet.in
Tel : 020-2569 0836 / 0837
Website: http://www.icitonline.org/
Address: VLSI Design and Research Center, Department of Electronic Science, Pune University Campus, Ganeshkhind Road, Pune-411007
Last date of submission of Forms: 13th February, 2009
Date of Entrance Test : 15th February, 2009
Advanced Digital Design, CMOS VLSI Design Hierarchy, System Architectures, Embedded Systems, High Level Design Methodology, Testing & Verifications, DSP, Industry Standard Projects
Certificate Course in Embedded System Design - 6 Months Full Time:
The course focus is on Advanced C, OOPs, RTOS, RTLINUX, Embedded System Hardware, Microprocessor, Microcontroller, CPLD, CSoC, DSP Fundamentals, Telecom Fundamentals, Sensors and Control Systems so on and Case Study, Industry Standard Projects.
Eligibility: B.E./BTech (Electronics & Telecommunication, Electrical, Instrumentation or Computers), M.Sc. (Electronics, Instrumentation, Computers or Physics with Spl. Electronics), M.C.S or equivalent.
Application procedure: Application from available at our centre and on the web site. Application and Entrance Exam Fee Rs. 250/- to be paid by cash / DD in favor of ICIT Pvt. Ltd. Pune, payable at Pune.
Applicants name & full address must be mentioned on the reverse side of the Demand Draft.
Email : vlsi@unipune.ernet.in
Tel : 020-2569 0836 / 0837
Website: http://www.icitonline.org/
Address: VLSI Design and Research Center, Department of Electronic Science, Pune University Campus, Ganeshkhind Road, Pune-411007
Last date of submission of Forms: 13th February, 2009
Date of Entrance Test : 15th February, 2009
Subscribe to:
Posts (Atom)