Central Institute of Tool Design was established by Government in 1968 with help from UNDP and ILO. At present the institue offers admission into Long Term Postgraduate Courses 2011
Courses Offered
1) Postgraduate Courses in Tool, Die and Mould Design (PGTD)
2) Postgraduate Course in CAD/CAM for Tool Engineering (PGCTE)
3) Postgraduate Course in Mechatronics (PGM)
4) Postgraduate Course in VLSI and Embedded Systems (PGVES)
Eligibility Criteria
Postgraduate Courses in Tool, Die and Mould Design (PGTD):
B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.
Postgraduate Course in CAD/CAM for Tool Engineering (PGCTE):
B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.
Postgraduate Course in Mechatronics (PGM):
B.E./B.Tech. in Mechanical Engineering / Production Engineering / Electronics Engineering / Electrical Engineering / Instrumentation Engineering / Automobile Engineering / Mechatronics Engineering or equivalent qualification.
Postgraduate Course in VLSI and Embedded Systems (PGVES):
B.E./B.Tech. in electronics Engineering / Electrical Engineering / Instrumentation Engineering or equivalent qualification.
AGE: No Age Limit. However, candidates below 45 years of age are preferred.
Experience for Sponsored candidates Only - Minimum 2 years of professional experience after passing qualifying examination as on June 30, 2011.
Application Procedure
The admission will be on a first come first serve basis through counseling. Candidates are advised to refer to the institute’s website: www.citdindia.org
Contact Info
Central Institute of Tool Design
Balanagar, Hyderabad - 500 037
Andhra Pradesh, INDIA
Phone: 91-40-2377 2747, 2748, 2749, 6178
Fax: 91-40-23772658
Email: citdplacements@citdindia.org,
citdcadcam@citdindia.org
Website: www.citdindia.org
Entrance Date: 30 June 2011
Courses Offered
1) Postgraduate Courses in Tool, Die and Mould Design (PGTD)
2) Postgraduate Course in CAD/CAM for Tool Engineering (PGCTE)
3) Postgraduate Course in Mechatronics (PGM)
4) Postgraduate Course in VLSI and Embedded Systems (PGVES)
Eligibility Criteria
Postgraduate Courses in Tool, Die and Mould Design (PGTD):
B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.
Postgraduate Course in CAD/CAM for Tool Engineering (PGCTE):
B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification.
Postgraduate Course in Mechatronics (PGM):
B.E./B.Tech. in Mechanical Engineering / Production Engineering / Electronics Engineering / Electrical Engineering / Instrumentation Engineering / Automobile Engineering / Mechatronics Engineering or equivalent qualification.
Postgraduate Course in VLSI and Embedded Systems (PGVES):
B.E./B.Tech. in electronics Engineering / Electrical Engineering / Instrumentation Engineering or equivalent qualification.
AGE: No Age Limit. However, candidates below 45 years of age are preferred.
Experience for Sponsored candidates Only - Minimum 2 years of professional experience after passing qualifying examination as on June 30, 2011.
Application Procedure
The admission will be on a first come first serve basis through counseling. Candidates are advised to refer to the institute’s website: www.citdindia.org
Contact Info
Central Institute of Tool Design
Balanagar, Hyderabad - 500 037
Andhra Pradesh, INDIA
Phone: 91-40-2377 2747, 2748, 2749, 6178
Fax: 91-40-23772658
Email: citdplacements@citdindia.org,
citdcadcam@citdindia.org
Website: www.citdindia.org
Entrance Date: 30 June 2011
Powered by DKOffice.in
No comments:
Post a Comment
Thanks for visiting this website. Your feedback are important to us. Please note we only approve genuine comments!